Many men are dissatisfied with the parameters of their sexual organ and do not want to do it.Therefore, different methods are used to help make the penis thicker and longer.A device as a pump to grow a member is also widely used.
Principle of device operation
Pump is a cylindrical device.The device is created to increase a person's penis in length and width, as well as to increase the lift.
The pump acts according to a simple principle.When used around the male penis, pressure occurs, which helps increase blood flow, fill the cave bodies with blood.The same thing happens as with a lift.The penis becomes very difficult, swells, which allows you to increase its parameters.
Varieties of pumps and pumps
Pumps to grow penis, regardless of type, has a single structure structure.It is a transparent container that describes centimeters.There are also devices that create a vacuum and the necessary pressure is kept.
There are three types of pumps:
- handbookThe vacuum is created using a piston or pear.Such devices have a lower cost, so they are often used.However, men have to wait for a long time to use them for their use.
- Automatic.In this type of pump, the balloon pressure is created thanks to the electric pump, which is already built on the device.For its work, you are required to enter battery.Automatic devices are preferable, as they have high efficiency, allow you to control pressure and suction.
- waterThe newest type of pump.It changes in that water is used instead of air.Such an increased, effective, adult variety, has few contraindications and serves much longer than previous models.
Pomping is performed in two ways.The first is called packaging.Its essence is to extend the tunic and an increase in penis in length, but not in width.To do this, use a narrow balloon in which the penis cannot be swollen on the sides, but will extend.
The second method is classic pumping.In this case, a wide balloon is used, in which the penis has the opportunity to swell in all directions.This allows you to increase the width and length of the organ.
During the exercises, preliminary security measures should be observed.
Criteria of choice
The lover pump is selected taking into account the size of the penis and the purpose of its use.Experts advise the following:
- The length of the device should be more than 3 cm.
- The width should be more than the diameter of the penis by 2 cm.
- For starters, it is recommended to choose a type of device manual, as it is the simplest.
The above dimensions of the member are considered only in a state of excitement.
In the purchase process, it is worth paying attention to the materials from which it grew.The breeze should be strong enough to avoid random damage to the male organ.
Contraindications
It is not allowed to use a vacuum increase in men suffering from the following pathologies:
- Thrombosis.
- Fibrosis.
- Hepatic diseases.
- Kidney disease.
- Diabetes.
- Pathologies of the heart and blood vessels.
- Sexually transmitted diseases.
- Dignity in the work of the universar.
If a person is not sure that he can use a pump to increase the length and width of the penis, then it is worth visiting the doctor for examination.
The pros and cons
Vacuum pumps allows men not only to make their dignity longer and wider.The device also helps improve erectile function, prolong sexual contact by reducing organ sensitivity.In addition, the device allows you to adjust the shape of the penis, even in the presence of bending.
The negative sides of the pump manifest only with its improper use.Failure to comply with the instructions involves many unpleasant consequences.
The effect of use
If you use the pump constantly, then after 6 months the penis will change its size permanently.To achieve the maximum effect, it is recommended to take medicines that increase the production of sex hormones to men.But this can only be done after advising a doctor.
It is worth knowing that a pump and a pump to increase the penis are one and the same.
They, then already tried the pump, note that they were able to achieve the desired result.Six months later, the length of the penis increases by 3 cm, and the thickness - by 2 cm.
Instructions for use
To use a vacuum pump to increase the penis, there is no need for special skills.Before the procedure, the device must be treated with lubrication to provide the slide.
A male member is forced to lubricate with a special cream, the effect of which allows us to normalize blood flow, strengthen a blood rush in the penis.
Then place the genitals in the cylinder.Eliminate the air from the balloon to create a vacuum environment.Once the rash occurs, it is necessary to wait 30 seconds and start the air.The procedure should take no more than 15-20 minutes.
Possible consequences
No wonder a special instruction has been established for the use of the pump.Applying all manipulations strictly to it avoids adverse consequences.But sometimes the men neglect the rules.
As a result, instead of the desired centimeters, they get the following:
- The appearance of a swollen ring at the base of the penis head.This is due to the stagnation of the lymphatic fluid.This phenomenon can also occur with the proper use of a vacuum device.If this side effect is observed, you should stop using the device.
- Penis swelling due to the flow of a large amount of lymph.
- Deteriorating the erectile function.
- Penis rash, the appearance of bleeding.
- Thrombosis.The disease poses a major threat to human life, but when the use of the pump is extremely rare.
In order not to have negative consequences, it is important not only to use the pump correctly.It is also necessary not to ignore the presence of contraindications for its implementation.If they are, then you should look for other penis growth methods.
Home appliance
For men who do not want to spend money on buying a factory growth, it is possible to make it home with their own hands.
From the cufflink pump
To create an air -free environment, it is necessary to promote the cuff pump, turn the handcuffs with the back.Then you need to assemble the device again, but already in the opposite order.
Next, you need to make a valve that is created to get out of excess air.For this purpose, you can apply the valve from the aquarium compressor.It should be connected to a suitable hose and signature.
From the compressor
You can get the compressor from unnecessary cooling devices.After extracting the evaporator and the capacitor, the tubes to which they are connected must be cut.After that, connect the compressor to the network.
At each shop for drivers, get an air filter.Should climb the compressor hole.The filter must be connected to the rubber hose of the required size.Next, it remains only to prove the effect of the device.
The pump helps, but the use of testosterone -containing medicines, or the use of an extension with the use of a pump, gives a greater effect with the use of a pump.
Using a syringe
Take a plastic tube, cut three parts, the size of each should be 10 cm.Attach them to tea.The result is a topic of three bastards.
In central pulling to attach a syringe nose.In the side -made curves, install the valves.
It is important for someone to open, and the second - inside.In order not to be confused in the future, you need to draw arrows that will show the direction of air.
The use of plastic bottles
A fairly simple pump for growing penis can be created by ordinary plastic bottles.It is only important to choose a different container size.The one who is larger must interrupt the top to make the shape of the cylinder.
At the bottom of the second bottles, make holes and put it in the first container.It is important that a large gap is not formed between the walls.Then you need to attach the hose to a large container.You can get it from the wheel pumping pumps on the bike.
Take care of the device
To maximize the extension of the service life, it is necessary to take care of it correctly.If the device is only purchased and not yet used, then it is necessary to completely rinse it with soap, and then dry and treated with any antiseptic.Next, wash the device after each use.
You cannot treat the pump with hydrogen peroxide or boiling water, as well as use fats with fats during the lubricant procedure.Otherwise, the risk of damage is high.